Spanjaard FLAW & CRACK DETECTOR SYSTEM探伤剂
Spanjaard FLAW & CRACK DETECTOR SYSTEM探伤剂一套三种一起使用探测金属裂痕，1号清洗剂2号渗透剂3号显示剂，能以红线或红点显示出金属的裂痕。
Set of 3 products for detecting cracks and flaws
in metals. Meets DTD 929/MIL-I-25135E Group 1 & 2 US
Military specification.
No. 1 CLEANER No. 2 PENETRANT No. 3 DEVELOPER
- Will show up cracks as red lines and porous areas
as red pin points on all types of metal
- Inspection and checking of tools or incoming
materials, for defects and hairline fractures
- Checking for potential fatigue cracks or flaws
during maintenance where parts are subjected to
heavy stress
- Inspection of welded areas that must be free of flaws
Units per Carton:
12
12
12
Container Size:
350ml aerosol
300ml aerosol
350ml aerosol
Application Instructions:
Cleaner: Remove all
oil, grease and dust.
Penetrant: Parts must
be room temp. Spray
liberally, allow at least
5 minutes contact time.
Cleaner: Spray Cleaner
onto clean cloth and wipe
off all excess penetrant.
Developer: Spray a thin,
even film, leave on for
10min before inspection
for fine flaws.
Typical Properties & Handling/Storage:
Colour: Cleaner -
Colourless.Penetrant - Red.
Developer - White.
Odour: Cleaner - Ether-like.
Penetrant - Distinct.
Developer - Solvent.
Flammable. Do not expose
to direct sunlight. Store
under cover/indoors. Use in
well ventilated area.
Do not expose to temp’s
above 50°C.
|
