Spanjaard MOULD PROTECTOR 模具保护剂
Spanjaard MOULD PROTECTOR BLUE模具保护剂能防止注钢或基础生产的模具腐蚀,也用于钢铁和其他合金表面上。
This is a blue version of our Standard Mould
Protector for corrosion protection of steel injection
& extrusion moulds in storage between use. The
product need not be removed before the mould is
reused & will only affect 1 or 2 articles produced
once mould is reused.
- Displaces and repels water
- Protects metal surfaces from rust and acid/alkali
attack
- Protects all steel and metal surfaces against corrosion
Units per Carton:
24
Container Size:
400ml aerosol
Application Instructions:
Shake can and spray
evenly 20cm from
surface.
Allow to dry for 30
seconds and apply
second coat.
Coating can be removed
with white spirits or
aromatic solvent.
After use invert can and
spray to clear nozzle
Typical Properties & Handling/Storage:
Appearance: Blue.
Protection of up to 12 months
indoor storage.
Flammable. Do not spray on naked
flame or incandescent material.
Protect from sunlight, do not
expose to temps above 50°C
Store indoors.
Ensure good ventilation during use.
Keep out of reach of children.
|